Manufacturer for Ev Charging Pile - JSY-MK-183 AC charging pile multi-channel measurement and zero line current acquisition module – JIAN SI YAN

Description:

Product Detail

Product Tags

Feedback (2)

The business keeps to the operation concept "scientific management, premium quality and efficiency primacy, customer supreme for Power Energy Meter , Intelligent Pdu , Power Quality Monitor , We hope to establish more business relationships with customers all over the world.

Manufacturer for Ev Charging Pile - JSY-MK-183 AC charging pile multi-channel measurement and zero line current acquisition module – JIAN SI YAN Detail:

Description

Jsy-mk-183 AC 8-channel temperature measurement and zero line current acquisition module can be widely used in charging pile, energy-saving transformation, power, communication, railway, transportation, environmental protection, petrochemical, iron and steel and other industries to monitor the AC and power consumption of AC equipment.

Technical Parameter

1. AC 8-way input
1) Voltage range: 0~350v (customizable).
2) Current range: 10A per circuit (customizable).
3) Signal processing: special metering chip is adopted, and 24 bit AD is adopted.
4) Overload capacity: 1.2 times the range is sustainable; The instantaneous (<20ms) current is 5 times, the voltage is 1.2 times, and the range is not damaged.
5) Input impedance: voltage channel >1k Ω /v, current channel ≤ 10m Ω.

2. Communication interface
1) Interface type: 2-way RS-485 communication interface.
2) Communication protocol: MODBUS-RTU protocol.
3) Data format: software can set “n, 8,1″, “E, 8,1″, “O, 8,1″, “n, 8,2″.
4) Communication rate: the baud rate of RS-485 communication interface can be set to 9600, 19200, 38400bps; The baud rate is 9600bps by default, and the data format is “n, 8,1″.

3. Test output data
Voltage, current, power, electric energy, zero line current and other electrical parameters.

4. Measurement accuracy
Voltage, current and power: ± 1.0%; Active kwh is level 1.

5. Electrical isolation
RS-485 interface, which is isolated from the power supply and each measured power supply; Isolation withstand voltage 1000VAC.

6. Power supply
1) Dc9~50v wide range power supply.
2) Typical power consumption: 165ma (12V).

7. Working environment
1) Working temperature: -20~+70 ℃; Storage temperature: -40~+85 ℃.
2) Relative humidity: 5~95%, no condensation (at 40 ℃).
3) Altitude: 0~3000 meters.
4) Environment: a place without explosion, corrosive gas and conductive dust, and without significant shaking, vibration and impact.

8. Temperature drift: ≤100ppm/℃.

9. Product size: 252.8*80mm.

Product detail pictures:

Related Product Guide:

Persisting in "High good quality, Prompt Delivery, Aggressive Price", we've established long-term cooperation with shoppers from each overseas and domestically and get new and previous clients' high comments for Manufacturer for Ev Charging Pile - JSY-MK-183 AC charging pile multi-channel measurement and zero line current acquisition module – JIAN SI YAN, The product will supply to all over the world, such as: Nigeria, Slovakia, New Orleans, If you are for any reason unsure which product to select, do not hesitate to contact us and we will be delighted to advise and assist you. This way we will be providing you with all the knowledge needed to make the best choice. Our company strictly follows "Survive by good quality, Develop by keeping good credit. " operation policy. Welcome all the clients old and new to visit our company and talk about the business. We are looking for more and more customers to create the glorious future.

Ac Charging Pile Metering Module